Has anyone got any of the original manuals or documentation for a robbe seawolf v2, robbe hasnt been around for a long time so finding information is rather difficult, im not even sure if its a static or dynamic diver or even how to take it apart, It should be arriving in a couple of days so I would like to have some idea what im doing before I damage it.
Who is online?
In total there are 5 users online :: 0 Registered, 0 Hidden and 5 Guests
None
Most users ever online was 180 on Tue Nov 05, 2019 6:03 am
Latest topics
Search
Most Viewed Topics
Statistics
Our users have posted a total of 12425 messages in 1980 subjects
We have 1003 registered users
The newest registered user is Stefan Udovenko КПДЮ
Similar topics
2 posters
documentation for a robbe seawolf v2
maxx78- Posts : 18
Join date : 2022-05-02
Location : Hamburg, Germany
Hi geofrancis,
i have a Seawolf V2.
Normally it is a dynamic diver with an option to control the front dive planes with a mechnism connected to the "Periskop".
have you seen this: https://robbeseawolf.wordpress.com/instructions/instructions-robbe-sea-wolf-v1/
its for the V1 but most of it is the same.
The main differnce is that the locking mechanism goes to the tip of the bow. you use an allen wrench to pull the inner part tight against the pressure hull.
i have a Seawolf V2.
Normally it is a dynamic diver with an option to control the front dive planes with a mechnism connected to the "Periskop".
have you seen this: https://robbeseawolf.wordpress.com/instructions/instructions-robbe-sea-wolf-v1/
its for the V1 but most of it is the same.
The main differnce is that the locking mechanism goes to the tip of the bow. you use an allen wrench to pull the inner part tight against the pressure hull.
geofrancis likes this post
geofrancis- Posts : 282
Join date : 2021-09-24
thank you i had not seen that, I could only find small photos of complete builds and some basic specifications.
geofrancis- Posts : 282
Join date : 2021-09-24
what is the third pushrod going out the back of the sub? I see 2 are for pitch and rudder but what is the one at the bottom for ?
nevermind i see its for a power switch...strange.
nevermind i see its for a power switch...strange.
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis
» Not the hobby I expected :)
Sun Mar 10, 2024 6:30 pm by cat
» 868/915 Mhz as a viable frequency for submarines.
Wed Mar 06, 2024 4:50 pm by tsenecal
» Sheerline gasket material
Mon Feb 19, 2024 9:24 pm by Michaelc
» Choice of CAD software and Printer for 3D printing
Thu Feb 15, 2024 1:53 pm by david f
» Engel Nautlus
Tue Feb 13, 2024 9:15 am by palmert6
» RF 27/433MHz maximum depth in pools (1-5 ppm chlorine, 6-8pH)
Thu Feb 08, 2024 2:05 pm by david f
» Arduino proportional control of a piston tank
Thu Feb 08, 2024 1:37 pm by david f