Hi my names Gregg,
I returned to plastic modelling about 3 yrs ago after a lay-off for 40+years.
During that time I was into R/C aircraft, both building and flying (crashing)
Now retired and being my disabled wife's & Elderly mother's carer, I made the decision to get back to my original passion of kit modelling. This I thought would allow me to escape from the outside world occasionally.
For my first new plastic build on my return I decided to change Genre, so I converted an 1/35 Italeri S-100 Schnellboat into R/C. Having limited (me) time this took me 3 years starting it in 2011 to complete.
Having completed this, and recently seeing a completed Revell Type VIC submarine. I thought I would give one a go, and have decided I would like to convert this to R/C.
I have managed to obtain both the Revell 1/72 Gato & the Type IX U-Boat.
I will probably only build as a surface runner, as it seems quite complicated/expensive to get it to go under.
A member of another forum suggested I look on here, so here I am!
I hope you will forgive me if I ask some questions that me seem simple to you, but maybe confusing to me.
Just realised I have posted this in the wrong section. (great Start)
Gregg
I returned to plastic modelling about 3 yrs ago after a lay-off for 40+years.
During that time I was into R/C aircraft, both building and flying (crashing)
Now retired and being my disabled wife's & Elderly mother's carer, I made the decision to get back to my original passion of kit modelling. This I thought would allow me to escape from the outside world occasionally.
For my first new plastic build on my return I decided to change Genre, so I converted an 1/35 Italeri S-100 Schnellboat into R/C. Having limited (me) time this took me 3 years starting it in 2011 to complete.
Having completed this, and recently seeing a completed Revell Type VIC submarine. I thought I would give one a go, and have decided I would like to convert this to R/C.
I have managed to obtain both the Revell 1/72 Gato & the Type IX U-Boat.
I will probably only build as a surface runner, as it seems quite complicated/expensive to get it to go under.
A member of another forum suggested I look on here, so here I am!
I hope you will forgive me if I ask some questions that me seem simple to you, but maybe confusing to me.
Just realised I have posted this in the wrong section. (great Start)
Gregg
Last edited by ojays on Wed Oct 22, 2014 10:09 pm; edited 1 time in total (Reason for editing : Wrong forum!)
Tue Dec 31, 2024 3:52 am by tsenecal
» WW2 mini sub build
Sat Dec 21, 2024 11:49 am by SimonH
» Cheap Arduino Auto leveler
Sun Dec 15, 2024 7:44 am by geofrancis
» Microprocessor choices
Wed Dec 04, 2024 7:26 am by geofrancis
» Robbe Seawolf V2
Wed Dec 04, 2024 7:17 am by geofrancis
» Futaba -868/915mhz equipment
Tue Oct 29, 2024 4:46 pm by tsenecal
» RC Drift Gyro for pitch control
Sun Oct 20, 2024 2:04 pm by geofrancis
» sonar data link
Mon Oct 14, 2024 4:31 pm by geofrancis
» ExpressLRS - 868/915 Mhz equipment
Fri Oct 11, 2024 8:58 pm by Marylandradiosailor