Home
Register
Log in
HI,
I have these Balance Charger/Discharger model "Variable 6S" from Hobby King and I am trayng to find out how can I made the settings to charge:
1) Sanyo Ni Cd sub-C 4.8V/2500mA pack(4x1,2V/2500mA)
2) Sanyo Ni Cd sub-C 12V/2500mA pack(10x1,2V/2500mA)
3) Duracel AA NiMH 4,8V/2500mA pack(4x1,2V/2500mA)
4) Sylva AA Ni Cd 4,8V/850mA pack(4x1,2V/850mA)
5) Imedion AA Ni Cd 4,8V/2100mA pack(4x1,2V/2100mA)
QUESTION:
a) is not necessary to make the balancer to remember the settings,at least to make the settings for CHARGE every time I need,
b) also I want to make the settings for DISCHARGE all I have;
c) or if someone has the MANUAL (pdf/word) and he can send me a copy wheel be more than WELCOME.
MANY THANKS in Advance.
MARIUS
P.S. I have the pictures but I forget how to post it!.
I have these Balance Charger/Discharger model "Variable 6S" from Hobby King and I am trayng to find out how can I made the settings to charge:
1) Sanyo Ni Cd sub-C 4.8V/2500mA pack(4x1,2V/2500mA)
2) Sanyo Ni Cd sub-C 12V/2500mA pack(10x1,2V/2500mA)
3) Duracel AA NiMH 4,8V/2500mA pack(4x1,2V/2500mA)
4) Sylva AA Ni Cd 4,8V/850mA pack(4x1,2V/850mA)
5) Imedion AA Ni Cd 4,8V/2100mA pack(4x1,2V/2100mA)
QUESTION:
a) is not necessary to make the balancer to remember the settings,at least to make the settings for CHARGE every time I need,
b) also I want to make the settings for DISCHARGE all I have;
c) or if someone has the MANUAL (pdf/word) and he can send me a copy wheel be more than WELCOME.
MANY THANKS in Advance.
MARIUS
P.S. I have the pictures but I forget how to post it!.
» U-47 Robbe German Type VII R/C in 1/40
» U-47 Robbe German Type VII R/C in 1/40 scale
» Pinger 4 - A simpler design for an ultrasonic Pinger which gives an accurate 1 second pulse.
» Lipo cut off circuit - Practical Electronics magazine - November 2021
» GRP end caps
» UHF radio control for submarines (openLRS, LoRa, FSK etc. on 458Mhz and 433Mhz )
» WW2 mini sub build
» My X craft