Just been trying this out with LoRa telemetry and my old faithful "Charlie" class:
Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI (Bought from PiHut in the UK)
Seems to be working quite well. (Telemetry output is now signal strength, depth and battery voltage.
LATER EDIT: (January 2022) Still working well after a number of sailings. Surface telemetry value = 3. Dived to 0.5 m = 8
Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI (Bought from PiHut in the UK)
Seems to be working quite well. (Telemetry output is now signal strength, depth and battery voltage.
LATER EDIT: (January 2022) Still working well after a number of sailings. Surface telemetry value = 3. Dived to 0.5 m = 8
Today at 11:02 am by stig58
» Cheap Arduino Auto leveler
Sat May 11, 2024 6:53 pm by 17b
» No reverse on Brushless ESC
Tue May 07, 2024 3:26 pm by geofrancis
» Peral Submarine of 1888
Mon May 06, 2024 11:16 am by david f
» Newbie needs advice!
Fri Apr 26, 2024 1:58 pm by david f
» Modulated electric fields for submarine communication in a "heads up" from Harry!
Sun Apr 21, 2024 6:09 am by geofrancis
» 868/915 Mhz as a viable frequency for submarines.
Wed Apr 10, 2024 5:48 am by tsenecal
» Laser cut Robbe U47 conversion
Tue Apr 09, 2024 3:40 pm by david f
» ExpressLRS - 868/915 Mhz equipment
Tue Apr 02, 2024 3:27 pm by tsenecal