Hi... I can't build at the moment so I am messing about on the computer... just worked this out and I thought I would share it....
You can make the hull of a Type XXIII U boat at 1/25th scale with PVCu pipes...
At 1388mm long it is quite accurately 1/25th scale obviously this is just the central part, but the ends and the sail could be made quite easily in FG.
The pipe is readily available in 125mm (soil Pipe) and 110mm (Air Vent Pipe)
Lee
You can make the hull of a Type XXIII U boat at 1/25th scale with PVCu pipes...
At 1388mm long it is quite accurately 1/25th scale obviously this is just the central part, but the ends and the sail could be made quite easily in FG.
The pipe is readily available in 125mm (soil Pipe) and 110mm (Air Vent Pipe)
Lee
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis
» Not the hobby I expected :)
Sun Mar 10, 2024 6:30 pm by cat
» 868/915 Mhz as a viable frequency for submarines.
Wed Mar 06, 2024 4:50 pm by tsenecal
» Sheerline gasket material
Mon Feb 19, 2024 9:24 pm by Michaelc
» Choice of CAD software and Printer for 3D printing
Thu Feb 15, 2024 1:53 pm by david f
» Engel Nautlus
Tue Feb 13, 2024 9:15 am by palmert6
» RF 27/433MHz maximum depth in pools (1-5 ppm chlorine, 6-8pH)
Thu Feb 08, 2024 2:05 pm by david f
» Arduino proportional control of a piston tank
Thu Feb 08, 2024 1:37 pm by david f