Hi
I am just fitting the electrics into U177 - piston tanks functional, servos work, motors work ..... but a big but.
The motors seem only to function forward, I cannot get reverse to work. I am using Robbe Rookie 25 as recommended, I have followed the set up to the letter (noting the ability to disable reverse & not doing that step). The light is steady for forward & flashing when I pull it back for reverse as the manual says it should be
I am running the system on a Robbe FC-16 Navy with a twin stick controller on channel 1 & 2.
As forward is so smooth I must be missing something obvious - question is what.
Any suggestions would be gratefully received
ATB
Rob
PS I will get soem photos posted when it looks tidy.
I am just fitting the electrics into U177 - piston tanks functional, servos work, motors work ..... but a big but.
The motors seem only to function forward, I cannot get reverse to work. I am using Robbe Rookie 25 as recommended, I have followed the set up to the letter (noting the ability to disable reverse & not doing that step). The light is steady for forward & flashing when I pull it back for reverse as the manual says it should be
I am running the system on a Robbe FC-16 Navy with a twin stick controller on channel 1 & 2.
As forward is so smooth I must be missing something obvious - question is what.
Any suggestions would be gratefully received
ATB
Rob
PS I will get soem photos posted when it looks tidy.
Fri Mar 15, 2024 4:36 pm by david f
» WW2 mini sub build
Tue Mar 12, 2024 1:56 pm by geofrancis
» Not the hobby I expected :)
Sun Mar 10, 2024 6:30 pm by cat
» 868/915 Mhz as a viable frequency for submarines.
Wed Mar 06, 2024 4:50 pm by tsenecal
» Sheerline gasket material
Mon Feb 19, 2024 9:24 pm by Michaelc
» Choice of CAD software and Printer for 3D printing
Thu Feb 15, 2024 1:53 pm by david f
» Engel Nautlus
Tue Feb 13, 2024 9:15 am by palmert6
» RF 27/433MHz maximum depth in pools (1-5 ppm chlorine, 6-8pH)
Thu Feb 08, 2024 2:05 pm by david f
» Arduino proportional control of a piston tank
Thu Feb 08, 2024 1:37 pm by david f