* THE FORUM FOR ALL THOSE INTERESTED IN BUILDING AND OPERATING MODEL SUBMARINES *



Join the AMS - Registered Forum users can become members of the AMS and it's free ...... To join send an email with your name , address and phone number to amstreasure@googlemail.com


For further details of any events shown here also see the "Shows and Events" section on the forum

*STOP PRESS* Coronavirus. A lot of Clubs have already cancelled all activities. Check carefully before you plan any travel

.

CANCELLED because of coronavirus. Papplewick Pumping Station, Nottingham, Sunday 12th & Monday 13th April
CANCELLED because of coronavirus. Bournville Sub Day, Sunday 10th May 2020

. ,

Submarine, Boating & Sailing Weekend, Norwich MBC, Weekend of 25,26th July

,./
.
Model Boat Convention, Haydock Park (Cancelled this year)

.

Bournville Sub Day, Sunday 13th September

,,,,

Club Submarine Regatta, Furness MBC, Barrow in Furness, Sunday 20th Sept 2020

Who is online?

In total there are 4 users online :: 0 Registered, 0 Hidden and 4 Guests :: 1 Bot

None


Most users ever online was 180 on Tue Nov 05, 2019 6:03 am

Latest topics

» today's work
type id and maker if poss EmptyYesterday at 3:45 am by merriman

» RC for Submarines
type id and maker if poss EmptyWed Apr 08, 2020 10:26 pm by Hermann

» Telemetry on openLRS
type id and maker if poss EmptyTue Apr 07, 2020 10:55 am by david f

» 3D printed sub kits
type id and maker if poss EmptyThu Apr 02, 2020 10:40 am by david f

» British Submarines in Two World Wars by Norman Friedman publ by Seaforth.
type id and maker if poss EmptyTue Mar 24, 2020 11:27 am by david f

» stretching sprue
type id and maker if poss EmptyThu Mar 12, 2020 1:13 pm by merriman

» Arduino proportional control of a piston tank
type id and maker if poss EmptyThu Mar 05, 2020 2:30 pm by david f

» Looking for Paint Colour Advice
type id and maker if poss EmptyWed Feb 26, 2020 10:30 am by david f

» Voltage or data measurement by WiFi - Node Mcu (Arduino) - A failed experiment
type id and maker if poss EmptyMon Feb 17, 2020 11:10 pm by C-3PO

Statistics

Our users have posted a total of 11109 messages in 1818 subjects

We have 845 registered users

The newest registered user is exceed

    type id and maker if poss

    treeboa
    treeboa
    Guest

    Posts : 7
    Join date : 2011-09-16
    Age : 65
    Location : durham

    type id and maker if poss Empty type id and maker if poss

    Post  treeboa on Sun Sep 18, 2011 11:45 pm

    ok guys, new to the forum, new to subs, i have swapped some stuff for a couple of hulls, one is from my thoughts a v11 - the yellow hulled one, the grey however i not sure from the conning tower, i will have better pics once i pick the hulls up, also the makeup is totally different, the yellow hull i assume is a darnell, any ideas on the grey hull, also as that one has not instructions/plans etc has anyone got a set they could photocopy for me, obviously im willing to pay a reasonable price for them

    first the grey hulled one
    type id and maker if poss Greymidsuper
    type id and maker if poss Greyhull2
    they are a few fitting with this but no pics at moment

    next the assumed darnell v11

    type id and maker if poss SAM_0251a
    type id and maker if poss SAM_0252

    plus some of the fitting that are with it
    type id and maker if poss SAM_0254
    type id and maker if poss SAM_0255

    the yellow `darnell` apparently has a lot of paperwork with it so hopefully i will have all i need to get it as a fully functioning boat, the grey hull even if that only ends up as a surface runner im happy, its not too far off 1/35 scale to accompany my 1/35 schnellboot around the pond

    dont know if the images are too big, if you left click and open image in another tab you can see the full pic



    any help appreciated


    Last edited by treeboa on Mon Sep 19, 2011 12:18 am; edited 2 times in total (Reason for editing : added a bit)
    avatar
    Tom(ADMIN)
    AMS Forum Owner

    Posts : 3002
    Join date : 2010-11-05
    Age : 60
    Location : Nevada, USA

    type id and maker if poss Empty Re: type id and maker if poss

    Post  Tom(ADMIN) on Mon Sep 19, 2011 7:01 am

    Hi and welcome to the AMS forum...

    Both of your hulls were made by Darnell Models...the grey one is the original U-47, the first boat that John Darnell produced way back.

    The one in yellow primer looks like the later U-570/HMS Graph (the boat can be completed to represent either model).

    Both were (and still are) good kits with the potential to be built into a nicely performing model, but they do need a lot of work on them.



    Richard(ADMIN)
    treeboa
    treeboa
    Guest

    Posts : 7
    Join date : 2011-09-16
    Age : 65
    Location : durham

    type id and maker if poss Empty Re: type id and maker if poss

    Post  treeboa on Mon Sep 19, 2011 5:43 pm

    Yep the grey hull has darnell embossed inside the hull. Came with metcalf mouldings construction ooklet and robbe u47 plans, ideally now some kind soul will contact me offering one or both plan sheets for these boats
    avatar
    Tom(ADMIN)
    AMS Forum Owner

    Posts : 3002
    Join date : 2010-11-05
    Age : 60
    Location : Nevada, USA

    type id and maker if poss Empty Re: type id and maker if poss

    Post  Tom(ADMIN) on Mon Sep 19, 2011 5:48 pm

    Try giving Andy Griggs (Models by Design) a call, he may be able to help you out with a instruction drawing for the U-570, but the U-47 may be a different story, you may have troubles getting a drawing for that boat.
    treeboa
    treeboa
    Guest

    Posts : 7
    Join date : 2011-09-16
    Age : 65
    Location : durham

    type id and maker if poss Empty Re: type id and maker if poss

    Post  treeboa on Tue Sep 20, 2011 10:38 am

    much obliged, rang andy and although theres not a lot instruction wise hes sending me what he has
    avatar
    Tom(ADMIN)
    AMS Forum Owner

    Posts : 3002
    Join date : 2010-11-05
    Age : 60
    Location : Nevada, USA

    type id and maker if poss Empty Re: type id and maker if poss

    Post  Tom(ADMIN) on Tue Sep 20, 2011 11:25 am

    Excellent...that's you sorted, then!
    treeboa
    treeboa
    Guest

    Posts : 7
    Join date : 2011-09-16
    Age : 65
    Location : durham

    type id and maker if poss Empty Re: type id and maker if poss

    Post  treeboa on Tue Sep 20, 2011 1:58 pm

    well at least these are supposed to sink :)
    avatar
    Tom(ADMIN)
    AMS Forum Owner

    Posts : 3002
    Join date : 2010-11-05
    Age : 60
    Location : Nevada, USA

    type id and maker if poss Empty Re: type id and maker if poss

    Post  Tom(ADMIN) on Tue Sep 20, 2011 2:36 pm

    That's the easy bit...getting them back up is a different kettle of fish!
    thegrimreaper
    thegrimreaper
    Guest

    Posts : 119
    Join date : 2010-12-01
    Age : 60
    Location : Ellesmere Port

    type id and maker if poss Empty Re: type id and maker if poss

    Post  thegrimreaper on Fri Sep 30, 2011 11:46 am

    treeboa wrote:well at least these are supposed to sink :)

    ships and boats (both targets) sink

    Submarines submerge and then surface (if your lucky, and done what the destructions say)ha ha ha

    Regards Mark
    avatar
    Tom(ADMIN)
    AMS Forum Owner

    Posts : 3002
    Join date : 2010-11-05
    Age : 60
    Location : Nevada, USA

    type id and maker if poss Empty Re: type id and maker if poss

    Post  Tom(ADMIN) on Fri Sep 30, 2011 12:33 pm

    thegrimreaper wrote:
    treeboa wrote:well at least these are supposed to sink :)

    ships and boats (both targets) sink

    Submarines submerge and then surface (if your lucky, and done what the destructions say)ha ha ha

    Regards Mark


    I'll let you know later on today when I get back from sailing mine...

      Current date/time is Fri Apr 10, 2020 12:48 am